View 74ALS151_261077.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
74ALS151 8-input multiplexer
Product specification IC05 Data Handbook 1991 Feb 08
Philips Semiconductors
Philips Semiconductors
Product specification
8-input multiplexer
74ALS151
FEATURES
* 8-to-1 multiplexing * On chip decoding * Multi-function capability * Complementary outputs * See 74ALS251 for 3-State version
DESCRIPTION
The 74ALS151 is a logic implementation of a single 8-position switch with the switch position controlled by the state of three select (S0, S1, S2) inputs. True (Y) and complementary (Y) outputs are both provided. The enable (E) is active-Low. When E is High, Y output is Low and the Y output is High regardless of all other inputs.
PIN CONFIGURATION
I3 I2 I1 I0 Y Y E GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC I4 I5 I6 I7 S0 S1 S2
SF00742
ORDERING INFORMATION
ORDER CODE DESCRIPTION COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C 74ALS151N 74ALS151D DRAWING NUMBER
TYPE
TYPICAL PROPAGATION DELAY 8.0ns
TYPICAL SUPPLY CURRENT (TOTAL) 8.0mA
16-pin plastic DIP 74ALS151 16-pin plastic SO
SOT38-4 SOT109-1
INPUT AND OUTPUT LOADING AND FAN-OUT TABLE
PINS I0 - I7 S0 - S2 E Y, Y Data inputs Select inputs Enable input (active-Low) Data outputs DESCRIPTION 74ALS (U.L.) HIGH/LOW 1.0/1.0 1.0/1.0 1.0/1.0 130/240 LOAD VALUE HIGH/LOW 20A/0.1mA 20A/0.1mA 20A/0.1mA 2.6mA/24mA
NOTE: One (1.0) ALS unit load is defined as: 20A in the High state and 0.1mA in the Low state.
LOGIC SYMBOL
4 3 2 1 15 14 13 12
IEC/IEEE SYMBOL
7 11 10 I0 I1 I2 I3 I4 I5 I6 I7 9 4 3 2 1 2 6 0 G 0 7 5 MUX
EN
11 10 9 7
S0 S1 S2 E Y Y
15 14 13
VCC = Pin 16 GND = Pin 8
5
6
12
SF00743
SF00744
1991 Feb 08
2
853-1022 01670
Philips Semiconductors
Product specification
8-input multiplexer
74ALS151
LOGIC DIAGRAM
I0 4 S2 9 I1 3 I2 2 I3 1 I4 15 I5 14 I6 13 I7 12
S1
10
S0
11
E
7
5 VCC = Pin 16 GND = Pin 8 Y Y
6
SF00741
FUNCTION TABLE
INPUTS S2 X L L L L H H H H S1 X L L H H L L H H S0 X L H L H L H L H E H L L L L L L L L OUTPUTS Y L I0 I1 I2 I3 I4 I5 I6 I7 Y H I0 I1 I2 I3 I4 I5 I6 I7
H = High voltage level L = Low voltage level X = Don't care
1991 Feb 08
3
Philips Semiconductors
Product specification
8-input multiplexer
74ALS151
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL VCC VIN IIN VOUT IOUT Tamb Tstg Supply voltage Input voltage Input current Voltage applied to output in High output state Current applied to output in Low output state Operating free-air temperature range Storage temperature range PARAMETER RATING -0.5 to +7.0 -0.5 to +7.0 -30 to +5 -0.5 to VCC 48 0 to +70 -65 to +150 UNIT V V mA V mA C C
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER MIN VCC VIH VIL IIk IOH IOL Tamb Supply voltage High-level input voltage Low-level input voltage Input clamp current High-level output current Low-level output current Operating free air temperature range 0 4.5 2.0 0.8 -18 -2.6 24 +70 LIMITS NOM 5.0 MAX 5.5 V V V mA mA mA C UNIT
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS1 MIN VO OH High-level High level output voltage VCC = 10%, VIL = MAX, , , VIH = MIN VCC = MIN, VIL = MAX, , , VIH = MIN VCC = MIN, II = IIK VCC = MAX, VI = 7.0V VCC = MAX, VI = 2.7V VCC = MAX, VI = 0.4V VCC = MAX, VO = 2.25V VCC = MAX -30 8.0 IOH = -0.4mA IOH = MAX IOL = 12mA IOL = 24mA VCC - 2 2.4 3.2 0.25 0.35 -0.73 0.40 0.50 -1.5 0.1 20 -0.1 -112 12 LIMITS TYP2 UNIT MAX V V V V V mA A mA mA mA
VO OL VIK II IIH IIL IO ICC
Low-level Low level output voltage Input clamp voltage Input current at minimum input voltage High-level input current Low-level input current Output current3 Supply current (total)
NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. The output conditions have been chosen to produce a current that closely approximates one half of the true short-circuit output current, IOS.
1991 Feb 08
4
Philips Semiconductors
Product specification
8-input multiplexer
74ALS151
AC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL PARAMETER TEST CONDITION Tamb = 0C to +70C VCC = +5.0V 10% CL = 50pF, RL = 500 MIN tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL Propagation delay In to Y Propagation delay In to Y Propagation delay Sn to Y Propagation delay Sn to Y Propagation delay E to Y Propagation delay E to Y Waveform 1 Waveform 2 Waveform 1, 2 Waveform 1, 2 Waveform 1 Waveform 1 3.0 5.0 3.0 5.0 5.0 7.0 5.0 5.0 4.0 4.0 4.0 5.0 MAX 12.0 12.0 15.0 15.0 15.0 16.0 15.0 16.0 12.0 12.0 12.0 14.0 ns ns ns ns ns ns UNIT
AC WAVEFORMS
For all waveforms, VM = 1.3V.
VIN VIN VM tPHL VM tPLH VM tPLH
VM tPHL
VOUT
VM
VM
VOUT
VM
VM
SF00093
SF00092
Waveform 1. Propagation Delay for Inverting Output
Waveform 2. Propagation Delay for Non-inverting Output
TEST CIRCUIT AND WAVEFORMS
VCC NEGATIVE PULSE VIN PULSE GENERATOR RT D.U.T. VOUT 90% VM 10% tTHL (tff) CL RL tw VM 10% tTLH (tr ) 0.3V 90% AMP (V)
tTLH (tr ) 90%
tTHL (tf ) AMP (V) 90% VM tw 10% 0.3V
Test Circuit for Totem-pole Outputs
POSITIVE PULSE 10%
VM
DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators.
Input Pulse Definition INPUT PULSE REQUIREMENTS Family Amplitude VM 74ALS 3.5V 1.3V Rep.Rate 1MHz tw 500ns tTLH 2.0ns tTHL 2.0ns
SC00005
1991 Feb 08
5
Philips Semiconductors
Product specification
8-input multiplexer
74ALS151
DIP16: plastic dual in-line package; 16 leads (300 mil)
SOT38-4
1991 Feb 08
6
Philips Semiconductors
Product specification
8-input multiplexer
74ALS151
SO16: plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
1991 Feb 08
7
Philips Semiconductors
Product specification
8-input multiplexer
74ALS151
DEFINITIONS
Data Sheet Identification
Objective Specification
Product Status
Formative or in Design
Definition
This data sheet contains the design target or goal specifications for product development. Specifications may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains Final Specifications. Philips Semiconductors reserves the right to make changes at any time without notice, in order to improve design and supply the best possible product.
Preliminary Specification
Preproduction Product
Product Specification
Full Production
Philips Semiconductors and Philips Electronics North America Corporation reserve the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. LIFE SUPPORT APPLICATIONS Philips Semiconductors and Philips Electronics North America Corporation Products are not designed for use in life support appliances, devices, or systems where malfunction of a Philips Semiconductors and Philips Electronics North America Corporation Product can reasonably be expected to result in a personal injury. Philips Semiconductors and Philips Electronics North America Corporation customers using or selling Philips Semiconductors and Philips Electronics North America Corporation Products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors and Philips Electronics North America Corporation for any damages resulting from such improper use or sale. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 (c) Copyright Philips Electronics North America Corporation 1997 All rights reserved. Printed in U.S.A.
Philips Semiconductors
1991 Feb 08 8

▲Up To Search▲

Price & Availability of 74ALS151

	To Download 74ALS151 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .